Forum comments in chronological order
Disclaimer: I am not responsible for what people (other than myself) write in the forums. Please report any abuse, such as insults, slander, spam and illegal material, and I will take appropriate actions. Don't feed the trolls.
Jag tar inget ansvar för det som skrivs i forumet, förutom mina egna inlägg. Vänligen rapportera alla inlägg som bryter mot reglerna, så ska jag se vad jag kan göra. Som regelbrott räknas till exempel förolämpningar, förtal, spam och olagligt material. Mata inte trålarna.
- Jun 2007
- Aug 2007
- Oct 2007
- Nov 2007
- Dec 2007
- Jan 2008
- Feb 2008
- Mar 2008
- Apr 2008
- May 2008
- Jun 2008
- Jul 2008
- Aug 2008
- Sep 2008
- Oct 2008
- Nov 2008
- Dec 2008
- Jan 2009
- Feb 2009
- Mar 2009
- Apr 2009
- May 2009
- Jun 2009
- Jul 2009
- Aug 2009
- Sep 2009
- Oct 2009
- Nov 2009
- Dec 2009
- Jan 2010
- Feb 2010
- Mar 2010
- Apr 2010
- May 2010
- Jun 2010
- Jul 2010
- Aug 2010
- Sep 2010
- Oct 2010
- Nov 2010
- Dec 2010
- Jan 2011
- Feb 2011
- Mar 2011
- Apr 2011
- May 2011
- Jun 2011
- Jul 2011
- Aug 2011
- Sep 2011
- Oct 2011
- Nov 2011
- Dec 2011
- Jan 2012
- Feb 2012
- Mar 2012
- Apr 2012
- May 2012
- Jun 2012
- Jul 2012
- Aug 2012
- Sep 2012
- Oct 2012
- Nov 2012
- Dec 2012
- Jan 2013
- Feb 2013
- Mar 2013
- Apr 2013
- May 2013
- Jun 2013
- Jul 2013
- Aug 2013
- Sep 2013
- Oct 2013
- Nov 2013
- Dec 2013
- Jan 2014
- Feb 2014
- Mar 2014
- Apr 2014
- May 2014
- Jun 2014
- Jul 2014
- Aug 2014
- Sep 2014
- Oct 2014
- Nov 2014
- Dec 2014
- Jan 2015
- Feb 2015
- Mar 2015
- Apr 2015
- May 2015
- Jun 2015
- Jul 2015
- Aug 2015
- Sep 2015
- Oct 2015
- Nov 2015
- Dec 2015
- Jan 2016
- Feb 2016
- Mar 2016
- Apr 2016
- May 2016
- Jun 2016
- Jul 2016
- Aug 2016
- Sep 2016
- Oct 2016
- Nov 2016
- Dec 2016
- Jan 2017
- Feb 2017
- Mar 2017
- Apr 2017
- May 2017
- Jun 2017
- Jul 2017
- Aug 2017
- Sep 2017
- Oct 2017
- Nov 2017
- Dec 2017
- Jan 2018
- Feb 2018
- Mar 2018
- Apr 2018
- May 2018
- Jun 2018
- Jul 2018
- Aug 2018
- Sep 2018
- Oct 2018
- Nov 2018
- Dec 2018
- Jan 2019
- Feb 2019
- Mar 2019
- Apr 2019
- May 2019
- Jun 2019
- Jul 2019
- Aug 2019
- Sep 2019
- Oct 2019
- Nov 2019
- Dec 2019
- Jan 2020
- Feb 2020
- Mar 2020
- Apr 2020
- May 2020
- Jun 2020
- Jul 2020
- Aug 2020
- Sep 2020
- Oct 2020
- Nov 2020
- Dec 2020
- Jan 2021
- Feb 2021
- Mar 2021
- Apr 2021
- May 2021
- Jun 2021
- Jul 2021
- Aug 2021
- Sep 2021
- Oct 2021
- Nov 2021
- Dec 2021
- Jan 2022
- Feb 2022
- Mar 2022
- Apr 2022
- May 2022
- Jun 2022
- Jul 2022
- Aug 2022
- Sep 2022
- Oct 2022
- Nov 2022
- Dec 2022
- Jan 2023
- Feb 2023
- Mar 2023
- Apr 2023
- May 2023
- Jun 2023
- Jul 2023
- Aug 2023
- Sep 2023
- Oct 2023
- Nov 2023
- Dec 2023
- Jan 2024
- Feb 2024
- Mar 2024
- Apr 2024
- May 2024
- Jun 2024
- Jul 2024
- Aug 2024
- Sep 2024
- Oct 2024
- Nov 2024
- Dec 2024
Dec 2011
Anonymous
Sun 4-Dec-2011 13:30
Sun 4-Dec-2011 13:30
Amazing work! congrats..... Darkangel of Ex-Unreal
Anonymous
Mon 12-Dec-2011 03:22
Mon 12-Dec-2011 03:22
This was enormously informative and helpful. I've bookmarked it for future use. Thank you!
Anonymous
Fri 16-Dec-2011 14:58
Fri 16-Dec-2011 14:58
Hee there,
I love listening to your Swan version, could you perhaps play some more with this? I grew up in these basic sounds
With kind regards,
Dokterzon
I love listening to your Swan version, could you perhaps play some more with this? I grew up in these basic sounds
With kind regards,
Dokterzon
(haiku)
Anonymous
Fri 16-Dec-2011 16:23
Fri 16-Dec-2011 16:23
Riktigt skön.
A case against syntax highlighting
fusionfile
August Karlstrom
Tue 20-Dec-2011 22:46
August Karlstrom
Tue 20-Dec-2011 22:46
Interesting article and I agree wholeheartedly. My preference is to use different colors only for comments and strings (which are typically the only symbols which can contain whitespace). I also use a variable width sans serif typeface and tabs for indentation. The overall goal is to keep things simple. My observation is that the more "smart" tools we use, the more complicated code we tend to write and this is certainly not a good thing.
Anonymous
Wed 21-Dec-2011 03:20
Wed 21-Dec-2011 03:20
I am trying to solve a mystery with certain services started at reboot or via a root crontab.
These sercvices seem to fail, unless I login to a shell that has a proper TTY setup
(eg: PuTTY of any type of ssh session)
If I start up these services with a proper tty, they work and continue to run.
My theory is that on reboot or via root crontab there is no tty.
How can I create a psuedo tty master/slave pair underwhich to run these services so they work, with me doing a manual ssh login......?
Larry Wichter
These sercvices seem to fail, unless I login to a shell that has a proper TTY setup
(eg: PuTTY of any type of ssh session)
If I start up these services with a proper tty, they work and continue to run.
My theory is that on reboot or via root crontab there is no tty.
How can I create a psuedo tty master/slave pair underwhich to run these services so they work, with me doing a manual ssh login......?
Larry Wichter
Anonymous
Thu 22-Dec-2011 14:54
Thu 22-Dec-2011 14:54
Would love to buy one!
Anonymous
Thu 22-Dec-2011 18:23
Thu 22-Dec-2011 18:23
You should definitely keep working with this. I would absolutely buy one.
Anonymous
Thu 22-Dec-2011 18:33
Thu 22-Dec-2011 18:33
Awesome! (As everything you do).
What are your favourite D/A converters?
What are your favourite D/A converters?
Anonymous
Thu 22-Dec-2011 22:21
Thu 22-Dec-2011 22:21
Well, I know that I would buy one...
Anonymous
Thu 22-Dec-2011 22:56
Thu 22-Dec-2011 22:56
Sell this as it is and you will make millions. Reserve one for me please!
Anonymous
Fri 23-Dec-2011 00:38
Fri 23-Dec-2011 00:38
What a wonderful instrument & a GREAT performance!
I too would LOVE an instrument like this - PLEASE let us know if you do decide to develop this or even kits of the bitbuf!
Suggestions - not too many. Perhaps stereo, with each 'part' being panned? Macro keys for different drum patterns & the ability to string them together as you do with the keyboard parts? Additional tempo divisions for the 'glitch' effect and the ability to have the glitch on just the drums?
Fantastic instrument - I sincerely hope you develop it further and consider making a version/kit for others to play!
Merry Christmas!
mCKENIC
I too would LOVE an instrument like this - PLEASE let us know if you do decide to develop this or even kits of the bitbuf!
Suggestions - not too many. Perhaps stereo, with each 'part' being panned? Macro keys for different drum patterns & the ability to string them together as you do with the keyboard parts? Additional tempo divisions for the 'glitch' effect and the ability to have the glitch on just the drums?
Fantastic instrument - I sincerely hope you develop it further and consider making a version/kit for others to play!
Merry Christmas!
mCKENIC
Anonymous
Fri 23-Dec-2011 10:00
Fri 23-Dec-2011 10:00
:O
make some kits,build some more ,or put the schematics online,
it's already finished enough as it is.
( or perhaps single outputs per part, if that's possible.)
make some kits,build some more ,or put the schematics online,
it's already finished enough as it is.
( or perhaps single outputs per part, if that's possible.)
Anonymous
Fri 23-Dec-2011 11:26
Fri 23-Dec-2011 11:26
Keep it up, I love the simplicity of it.
And you should put them up for sale at some point, I'd love a setup, like the one you're demoing here, to play with.
And you should put them up for sale at some point, I'd love a setup, like the one you're demoing here, to play with.
Anonymous
Fri 23-Dec-2011 15:15
Fri 23-Dec-2011 15:15
I will buy one !!!
Can you change de length of a note ?
Can you change de length of a note ?
Anonymous
Fri 23-Dec-2011 15:35
Fri 23-Dec-2011 15:35
Linus, I'd love to buy a kit! Merry Christmas!!
Anonymous
Fri 23-Dec-2011 16:06
Fri 23-Dec-2011 16:06
I'm totally in love with the BitBuf... Any chances to buy you a DIY kit or schemes to build one ?
Anonymous
Fri 23-Dec-2011 16:44
Fri 23-Dec-2011 16:44
This is freaking gorgeous. I want, I want, I want. Can you put up schematics and code?
Anonymous
Fri 23-Dec-2011 17:14
Fri 23-Dec-2011 17:14
Schematics would be the best christmas present for many of us 8bit lovers and tinkerers!
Happy new year :D
Happy new year :D
articblue
Jake
Fri 23-Dec-2011 17:26
Jake
Fri 23-Dec-2011 17:26
This is awesome, I love the glitch feature too. Well thought out and executed.
Thanks for sharing this.
Thanks for sharing this.
Anonymous
Fri 23-Dec-2011 18:04
Fri 23-Dec-2011 18:04
Check http://www.kickstarter.com/ for funding.
Anonymous
Fri 23-Dec-2011 18:27
Fri 23-Dec-2011 18:27
I'm an electronic musician, but haven't really ever gotten seriously into the chiptune movement. I'd still buy (or build) one of these without a 2nd thought! One of the most robust and professional-quality homebrew electronics projects I've ever seen!
Anonymous
Fri 23-Dec-2011 18:34
Fri 23-Dec-2011 18:34
Would reaaaaaaaally love to see some schematics and code for this, would love to make me one of these!
Anonymous
Fri 23-Dec-2011 18:43
Fri 23-Dec-2011 18:43
If you sold kits of this, there would be a ton of interest I'd bet. Very nice stuff, I enjoy all the various projects you have posted here.
Anonymous
Fri 23-Dec-2011 18:56
Fri 23-Dec-2011 18:56
This looks like a wonderful tool for chiptune. A nice looking case, with proper button caps, labelled panel, and retro style graphic logo would be some good finishig touches.
Many people would like to have one of these. You should produce this as a kit or complete unit, as adafruit industries does with the xoxbox.
Many people would like to have one of these. You should produce this as a kit or complete unit, as adafruit industries does with the xoxbox.
Anonymous
Fri 23-Dec-2011 18:58
Fri 23-Dec-2011 18:58
Really well done, very polished in this form, lot of thought and engineering.
Hack-A-Day picked up the story, which is where I found it:
http://hackaday.com/2011/12/23/bitbuf-delivers-some-of-the-best-chiptune-effects-around/
Hack-A-Day picked up the story, which is where I found it:
http://hackaday.com/2011/12/23/bitbuf-delivers-some-of-the-best-chiptune-effects-around/
Anonymous
Fri 23-Dec-2011 19:12
Fri 23-Dec-2011 19:12
I was so much in love whith your chipophone yet but it seems to be a good solution for carry everywhere. I would love to buy one !!!!
Anonymous
Fri 23-Dec-2011 19:17
Fri 23-Dec-2011 19:17
Hubbard reused a lot of his work in other pieces for the C64 (a common practice at the time). I think this was used for a skating game as well... it's been YEARS since my C64 still worked...
Anonymous
Fri 23-Dec-2011 19:36
Fri 23-Dec-2011 19:36
wow, i would have one! what is make and model of the keyboard?
Anonymous
Fri 23-Dec-2011 19:37
Fri 23-Dec-2011 19:37
well, definitly this is an awesome thing! i was thinking doing the same one time, but havent done even prototype to program and never expected to see something like that functionality. truly a masterpiece of MCU programming, would build one for myself if you decide to make it opensource and post schematics and firmware. great work anyway!
Anonymous
Fri 23-Dec-2011 19:37
Fri 23-Dec-2011 19:37
I would love source ode and schematics.
Anonymous
Fri 23-Dec-2011 19:38
Fri 23-Dec-2011 19:38
Let me guess, you had to make this amazing contraption after you finally found a song that you weren't able to play live on the chipophone? :D
Anonymous
Fri 23-Dec-2011 19:46
Fri 23-Dec-2011 19:46
Mass market this bitch. I want one. Also schematics. Take my money.
Anonymous
Fri 23-Dec-2011 20:11
Fri 23-Dec-2011 20:11
To quote Philip J Fry from the TV show Futurama; "Shut up and take my money!" This is simply hands down the best thing I've ever seen or heard moving electrical current do since the first time I turned on a video game system as a kid in the mid 1980's. Turn this into a unit, I will buy it. Sell it as a kit, I will buy it. Ask for donations, I will donate. Charming multiple layered classic sound without any perceivable emulation noise. Your demonstration shows it to be incredibly intuitive and user friendly, even as a proto board! Simply remarkable. I know of nothing on the audio equipment market today that even comes close to what I have just seen. Bravo!
Anonymous
Fri 23-Dec-2011 20:40
Fri 23-Dec-2011 20:40
could you please play DNA-Dream by 4-Mat on the chipophone? It would make me very happy. :)
Anonymous
Fri 23-Dec-2011 20:49
Fri 23-Dec-2011 20:49
Awesome!
Anonymous
Fri 23-Dec-2011 21:37
Fri 23-Dec-2011 21:37
Really good. You're clearly influenced by the SID! It would be wonderful if you could open source it, i've recently done that with a midibox synth related project and I've had great joy finding out what people can do with my code!
Anonymous
Fri 23-Dec-2011 22:23
Fri 23-Dec-2011 22:23
I would love to have one or more of these!
Anonymous
Fri 23-Dec-2011 22:50
Fri 23-Dec-2011 22:50
I think it's a great project, when i saw the chipophone i was so envious, now i have no words, i also think this is buyiable so my support on that aspect too, probably if you go to kickstarter you'll rise enough money to open your own synth company.
Also some tutorial for the comunity will be much apreciated :)
best wishes and good luck
Also some tutorial for the comunity will be much apreciated :)
best wishes and good luck
Anonymous
Fri 23-Dec-2011 23:32
Fri 23-Dec-2011 23:32
This site needs an RSS feed!
Anonymous
Fri 23-Dec-2011 23:49
Fri 23-Dec-2011 23:49
I would really like to build or buy one!
Anonymous
Sat 24-Dec-2011 00:21
Sat 24-Dec-2011 00:21
Would love to buy one!
^^^^^ that! and merry Christmas!
Anonymous
Sat 24-Dec-2011 03:11
Sat 24-Dec-2011 03:11
Would love to buy one!
^^^^^ that! and merry Christmas!
DITTO!
Anonymous
Sat 24-Dec-2011 03:54
Sat 24-Dec-2011 03:54
Wow what a stunning device! As with everyone else I hope you do indeed make this available somehow.
Anonymous
Sat 24-Dec-2011 04:04
Sat 24-Dec-2011 04:04
That is awesome, please make it open, I´ll make music.
Anonymous
Sat 24-Dec-2011 04:07
Sat 24-Dec-2011 04:07
That is awesome, please make it open, I´ll make music.
Anonymous
Sat 24-Dec-2011 04:08
Sat 24-Dec-2011 04:08
I would love to see the micro's source. That's fantastic what you pulled off.
Anonymous
Sat 24-Dec-2011 06:41
Sat 24-Dec-2011 06:41
Great job Linus, been a long time fan of your projects. If you ever decide to release .hex files I'll probably end up soldering one of these together :)
Anonymous
Sat 24-Dec-2011 10:45
Sat 24-Dec-2011 10:45
i would definitely buy one. just make sure it has midi sync for jamming with other gear.
Anonymous
Sat 24-Dec-2011 12:28
Sat 24-Dec-2011 12:28
YES YES YES YES YES YES YES YES YES!!!!!
Anonymous
Sat 24-Dec-2011 12:31
Sat 24-Dec-2011 12:31
Is it possible to sync it to incomming MIDI timing? If it is, i will buy one on the spot. You could perhaps sell it as kits, that would save you for alot of soldering ;-)
Anonymous
Sat 24-Dec-2011 15:18
Sat 24-Dec-2011 15:18
can i has to buy it?
Anonymous
Sat 24-Dec-2011 17:20
Sat 24-Dec-2011 17:20
If there is a NAND, people will build computers. I've seen that effect with Minecraft. But using unix pipes is just awesome, too :D
Came here to mention Minecraft. As someone who's built some logic gates in the game I should point out that the basic unit in Minecraft is actually the NOR gate, not NAND gate, but this doesn't make much difference as both of those are functionally complete, meaning anything can be built using them. The Apollo Guidance Computer, for example, was built entirely from NOR gates, while I believe modern computers tend to be based on NANDs.
Anonymous
Sat 24-Dec-2011 19:14
Sat 24-Dec-2011 19:14
I loved your chipophone organ mod, but bitbuf is really a mature product which I believe would have real commercial appeal. I know I want one! :-) Well done.
Anonymous
Sat 24-Dec-2011 19:27
Sat 24-Dec-2011 19:27
Hej Linus!
Jag skulle köpa en, det verkar riktigt häftigt!
En sak som jag skulle vilja se först är en metronom istället för en blinkande led för att se tempot, eller att kunna välja mellan att kunna höra takten när man spelar in. Det skulle hjälpa mig enormt.
Jag vill verkligen ha en! (om den inte kostar alldeles för mycket dvs.)
Kontakta mig genom mail på knerpan@gmail.com om du vill och har tid!
Mvh Jonatan
Jag skulle köpa en, det verkar riktigt häftigt!
En sak som jag skulle vilja se först är en metronom istället för en blinkande led för att se tempot, eller att kunna välja mellan att kunna höra takten när man spelar in. Det skulle hjälpa mig enormt.
Jag vill verkligen ha en! (om den inte kostar alldeles för mycket dvs.)
Kontakta mig genom mail på knerpan@gmail.com om du vill och har tid!
Mvh Jonatan
Hernandi
Hernandi Krammes
Sat 24-Dec-2011 19:46
Hernandi Krammes
Sat 24-Dec-2011 19:46
Hello.
This is realy programming art.
I am pleased hearing for the achived great performance with a microcontroler and a skiled mind.
You are better than Philip Glass.
Good xmas and new year.
This is realy programming art.
I am pleased hearing for the achived great performance with a microcontroler and a skiled mind.
You are better than Philip Glass.
Good xmas and new year.
Anonymous
Sun 25-Dec-2011 00:06
Sun 25-Dec-2011 00:06
damn! this patterns can't get out of my head...
nice perfomance. i also have a midi keyboard, avr's and really want to play with this device. ^^
nice perfomance. i also have a midi keyboard, avr's and really want to play with this device. ^^
Anonymous
Sun 25-Dec-2011 07:41
Sun 25-Dec-2011 07:41
This is pretty cool! It is great that you can do that in hardware, when will you share the plans? You mentioned Korg DS-10, but you should check out Rhythm Core Alpha on the Nintendo DSi and 3DS. It does all of the looping and chord stuff that this does and a lot more, and it's only a $5 or 5 Euro download in the DSiWare Shop or 3DS eShop.
Anonymous
Sun 25-Dec-2011 08:28
Sun 25-Dec-2011 08:28
Dude. I want this so bad. Really.
If you sell it, I will buy it. Like honestly, I haven't wanted something like this in my entire life. Ever.
Hats off to you for creating something this brilliant.
If you sell it, I will buy it. Like honestly, I haven't wanted something like this in my entire life. Ever.
Hats off to you for creating something this brilliant.
Anonymous
Sun 25-Dec-2011 10:20
Sun 25-Dec-2011 10:20
I love it! I would really want to buy one, or build one, if you share hardware schematics and software.
Also, great live performance dude. Share it with people! Record your live performances and put it on the Soundcloud, for example.
Cheers!
Also, great live performance dude. Share it with people! Record your live performances and put it on the Soundcloud, for example.
Cheers!
Anonymous
Sun 25-Dec-2011 14:32
Sun 25-Dec-2011 14:32
I've already watched this too many times and made my friends watch it.
For the first part of the song you have a fixed camera setup - can you tell me how you sync those? I assume it was all filmed in one take and you probably use some free software. Also, are they webcams or something else?
Ligius
For the first part of the song you have a fixed camera setup - can you tell me how you sync those? I assume it was all filmed in one take and you probably use some free software. Also, are they webcams or something else?
Ligius
Anonymous
Sun 25-Dec-2011 15:40
Sun 25-Dec-2011 15:40
Would It Be possible to do this but useing a Commodore SID Chip for audio??
Anonymous
Sun 25-Dec-2011 16:40
Sun 25-Dec-2011 16:40
I've been working on the same thing for a few moths right now. But what you have made... Really impressive. I'll just stop writing my shitcode and wait, until you release this cool thingy.
Anonymous
Sun 25-Dec-2011 16:43
Sun 25-Dec-2011 16:43
As a suggestion - make an hardware "upgrade". I know that artificially made lack of computing power leads to creativity - but don't overkill with this. This can also lead to lack of awesome features and possible future updates.
Anonymous
Mon 26-Dec-2011 01:19
Mon 26-Dec-2011 01:19
Sorry ladies, this hunk appears taken
Anonymous
Mon 26-Dec-2011 03:28
Mon 26-Dec-2011 03:28
Amazing work. I don't know what I want more, schematics for the device, or a full length album with you rocking out on it.
Anonymous
Mon 26-Dec-2011 03:46
Mon 26-Dec-2011 03:46
I think this is a wonderful project you have created here. I am not sure what you are planing on doing with the concept now that you have a working model but let me throw some ideas at you.
1. Sell it as a kit yourself - This would be a great way to make some money and share your product but it would require quite a bit of work on your part.
2. Sell your design to a company like adafruit - you would still make money and it would possibly take less work on your part.
3. Open source the design - You could provide files to make a PCB, a BOM and the code for everyone to make their own. You could do this and still provide kits or just PCBs.
4. Some combination of the previous 3
5. Do nothing with it and for others to make up their own project.
I really hope to see you do something with this, if I could buy one for $50-$100 I would pick one up tonight.
regards,
Jzatopa@gmail.com
1. Sell it as a kit yourself - This would be a great way to make some money and share your product but it would require quite a bit of work on your part.
2. Sell your design to a company like adafruit - you would still make money and it would possibly take less work on your part.
3. Open source the design - You could provide files to make a PCB, a BOM and the code for everyone to make their own. You could do this and still provide kits or just PCBs.
4. Some combination of the previous 3
5. Do nothing with it and for others to make up their own project.
I really hope to see you do something with this, if I could buy one for $50-$100 I would pick one up tonight.
regards,
Jzatopa@gmail.com
Anonymous
Mon 26-Dec-2011 04:03
Mon 26-Dec-2011 04:03
Forgot to mention that my girl and I think that this is a wonderful piece of art you have created. The improve, the synth + it's design and the fact you put this out there for everyone is awesome.
Jzatopa@gmail.com
Jzatopa@gmail.com
Anonymous
Mon 26-Dec-2011 08:57
Mon 26-Dec-2011 08:57
Gimme. (Also, if you're actually planning on starting to sell these, please don't make it too terribly overpriced?)
Anonymous
Mon 26-Dec-2011 14:21
Mon 26-Dec-2011 14:21
I think this can sell for $300 +
I would buy this for $400!
I would buy this for $400!
Anonymous
Mon 26-Dec-2011 22:58
Mon 26-Dec-2011 22:58
Grymt! Det byggs många konstiga musikmakapärer, både bra och dåliga, men det är sällan dess skapare kan ge ett ok demo av dem, det här låter helt fantastiskt!
Om du inte har några kommersiella planer måste du åtminstone släppa källkod / schema. Föredömligt minimalistisk hårdvara också.
Om du inte har några kommersiella planer måste du åtminstone släppa källkod / schema. Föredömligt minimalistisk hårdvara också.
Anonymous
Tue 27-Dec-2011 01:53
Tue 27-Dec-2011 01:53
i want to know how you made this and if you plan on mass producing this. i would by it like no ones business.
Anonymous
Tue 27-Dec-2011 03:39
Tue 27-Dec-2011 03:39
Maybe Gabriela's voice should be mixed a little louder?
This. Otherwise great work, as usual. I LOVE the Chipophone! It's great on so many levels...
Anonymous
Tue 27-Dec-2011 08:40
Tue 27-Dec-2011 08:40
I look forward to building one!
Anonymous
Wed 28-Dec-2011 02:10
Wed 28-Dec-2011 02:10
I'd build a kit, lovely programming and elegantly delivered, good demo.
Additions: hmm, mixer section if the minipots are not already doing that.
Stereo could be coded for pan rather than tweaked for panning, say set an arc of 7 possible pan positions.
A phase routine would be good but I suppose that's external efx.
Hardware:
Breakout board for individual outs as an option, or at least pcb solder pads on the board for those who want to go there. pcb midi jacks and a wall wart dc input jack, 9v uniersal. 9v battery option? On/off switch. midid receive send led. Needs a protective case like the shruthi or wtpa? Both have nice acrylic cases, so you may want to talk with olivier and Todd about that. At a minimum the caspar electronics dronemaster style case does provide good protection.
Clumsy players in darkened bars will want larger buttons, no offense but you are very tidy and precise (which is why you finished it so well of course.) That makes you atypical of a user, sadly.
Kit? Yes: but be careful about how you pacakge shipping the atmeg. I've had issues with that.
Using lsdj, dm8, sammichsid and that sort of chiptune thing at present and loads of analog.
lorne in Canada
Additions: hmm, mixer section if the minipots are not already doing that.
Stereo could be coded for pan rather than tweaked for panning, say set an arc of 7 possible pan positions.
A phase routine would be good but I suppose that's external efx.
Hardware:
Breakout board for individual outs as an option, or at least pcb solder pads on the board for those who want to go there. pcb midi jacks and a wall wart dc input jack, 9v uniersal. 9v battery option? On/off switch. midid receive send led. Needs a protective case like the shruthi or wtpa? Both have nice acrylic cases, so you may want to talk with olivier and Todd about that. At a minimum the caspar electronics dronemaster style case does provide good protection.
Clumsy players in darkened bars will want larger buttons, no offense but you are very tidy and precise (which is why you finished it so well of course.) That makes you atypical of a user, sadly.
Kit? Yes: but be careful about how you pacakge shipping the atmeg. I've had issues with that.
Using lsdj, dm8, sammichsid and that sort of chiptune thing at present and loads of analog.
lorne in Canada
Anonymous
Wed 28-Dec-2011 02:14
Wed 28-Dec-2011 02:14
me again, forgot to say 512 meg memory chip, lcd to show library? Borrow the sd card design that todd has already designed? www.narrat1ve.com
Anonymous
Wed 28-Dec-2011 02:17
Wed 28-Dec-2011 02:17
and one more comment: www.kickstarter.com to fund production costs. see quneo for an outrageous example of success.
Anonymous
Thu 29-Dec-2011 04:17
Thu 29-Dec-2011 04:17
This is inspiring. I would absolutely buy this and put it to amazing use. I've been using LSDJ and nanoloop for a while but I've never liked having to program the loops ahead of time. I play piano live, and this would ultimately satisfy every need I would ever have for performing. I'd like to mention that I'm an in no way tech savvy. I would never be able to build one of these if you were ever to simply release the instructions... So I beg you. Please please please offer an option to acquire one pre-built.
Just for reference, what keyboard is that?
Just for reference, what keyboard is that?
Anonymous
Thu 29-Dec-2011 12:19
Thu 29-Dec-2011 12:19
For the love of god Linus - make turn this into a kickstarter project. The world needs a bitbuf kit! Just make sure we can export/load via sysex or via, for example, an sd-card.
You are beyond amazing!
// christoffer, umeå
You are beyond amazing!
// christoffer, umeå
Anonymous
Thu 29-Dec-2011 22:12
Thu 29-Dec-2011 22:12
Great presentation. Another good example of chip music on real instruments is Russian balalayka, arpeggio is very common. Just listen to Aleksei Arkhipovsky playing "Mission Impossible theme" (video available on Youtube).
Anonymous
Fri 30-Dec-2011 06:19
Fri 30-Dec-2011 06:19
I see a lot of comments about what features you should add... I'd just like to say that I'm a huge fan of how simple and easy Bitbuf is to use. Adding an army of random features (like support for some add-on I've never heard of) would turn me away. Really, I'd be happy with buying the board as it is right now.
Anonymous
Sat 31-Dec-2011 10:33
Sat 31-Dec-2011 10:33
nihao! I'm a student from china.I am very interested in your work.Can you give me more details about all Data or the Electronic Components List,thank you this is my
gmail wkp1517@gmail.com. Thank you!!! >_<
gmail wkp1517@gmail.com. Thank you!!! >_<
Anonymous
Sat 31-Dec-2011 11:28
Sat 31-Dec-2011 11:28
Yes i would realy like to buy one :)
Anonymous
Sat 31-Dec-2011 11:30
Sat 31-Dec-2011 11:30
Yes i would like to buy this , Bra jobbat !
Anonymous
Sat 31-Dec-2011 14:59
Sat 31-Dec-2011 14:59
Nice work! How did you connect the MIDI cable to the USART?
Anonymous
Sat 31-Dec-2011 21:39
Sat 31-Dec-2011 21:39
Hello.
I was trying to compile your project, but got stuck on the file exported.s.
How do I get the tracker to export that file?
Thanks,
Tobias
I was trying to compile your project, but got stuck on the file exported.s.
How do I get the tracker to export that file?
Thanks,
Tobias
Anonymous
Sat 31-Dec-2011 21:44
Sat 31-Dec-2011 21:44
hehe. Got it to work. should probably read the README first :P
For everyone else, its the % key :)
Great project,
Tobias
For everyone else, its the % key :)
Great project,
Tobias